LATERAL ANKLE SOLUTION - BROSTROEM
WITH SF PUSH-IN ANCHOR 2.3
* Based on pull-out testing in Sawbone, 20 pcf after 3 months of simulated aging, comparing the 2.3 SF Push-in Anchor to a comparable barbed anchor.
** Based on internal 510(k) bench testing against a comparable barbed anchor under identical test conditions, showing more than 300X higher resistance against anchor dislocation under constant load.
FIX IT WHERE YOU WANT.
REPAIR WHAT YOU NEED.
SF PUSH-IN ANCHOR 2.3
Flexible positioning around pre-existing hardware
Fuse-it/Melt-it insertion
Works with either cortical or cancellous bone
More than Brostrom: treat the associated injuries too without compromise
Freedom of implant side-by-side placement
Augmentation prevents micromotion
10 sutures configurations
TRADITIONAL REPAIR
Plate-related placement constraints
Screw-it/Mallet-it insertion (mechanically forced)
Requires cortical bone for anchoring
Limited flexibility for associated injury repair
Restricted anchor side-by-side placement
Risk for micromotion
3-4 suture configurations
7X SMALLER BONE FOOTPRINT
Implant fuses into a 1.8mm pilot hole, augmenting and strengthening the bone.
FREEDOM OF IMPLANT SIDE-BY-SIDE PLACEMENT
Implants can be placed next to each other for best anatomical fit and optimal surgical technique.
20% HIGHER PULL-OUT STRENGTH*
Both: higher pull-out force and less trauma compared to a traditional barbed anchor of similar size.
* Based on pull-out testing in Sawbone, 20 pcf after 3 months of simulated aging, comparing the 2.3 SF Push-in Anchor to a comparable barbed anchor.
NO MICROMOTION**
Bone augmentation prevents any micromotion even under extreme constant loading conditions.
** Based on internal 510(k) bench testing against a comparable barbed anchor under identical test conditions, showing more than 300X higher resistance against anchor dislocation under constant load.
BIORESORBABLE IMPLANT
Amorphous polylactide (PLDLLA) implant that fully resorbs over time, while preserving functional stability.
VERSATILITY ACROSS BONE QUALITY
Flexible anatomical repair across varying bone quality, from cancellous to cortical bone.
FUSE-IT/MELT-IT INSERTION
Drill & fill for immediate ultrasonic fixation within seconds. Traditional barbed or threaded anchors require mechanically forced insertion (screw-it or mallet-it), compressing the surrounding bone.
FLEXIBLE POSITIONING AROUND PRE-EXISTING HARDWARE
Easily positioned around pre-existing plates, screws, or intramedullary nails.
MORE THAN BROSTROM: TREAT THE ASSOCIATED INJURIES TOO WITHOUT COMPROMISE
Enabling treatment of concomitant injuries such as AITFL repair and retinacular repair for fibularis tendon fixation.
10 SUTURE CONFIGURATIONS
Broad suture choice: single-loaded USP 4-0 to 2 and double-loaded USP up to 0 for optimal and patient-specific surgical technique.